Manufacturer by Type

Products by Category



Gwinstek GSP-810 Spectrum Analyzers

PDFPrint
The GSP-810 Spectrum Analyzer is a digitally synthesized, easy-to-use RF measurement instrument with a frequency range up to 1GHz.
Price:
Manufacturer: GWInstek
Description

1GHz Spectrum Analyzer

The GSP-810 Spectrum Analyzer is a digitally synthesized, easy-to-use RF measurement instrument with a frequency range up to 1GHz. It uses a state-of-art design with a phased-locked RF system that combines measurement quality and performance with an affordable price. The GSP-810 is also designed for rugged use with 1-watt input protection. With a compact size and feature packed functions, the GSP-810 is an affordable, expandable, and high quality instrument for the most demanding needs.

Features:

     Frequency Range: 150kHz ~1GHz

     Fully Digital Phase Locked Loop Technique Design

     High Frequency Stability:±10ppm

     RBW : 3K, 30k, 220k, 4MHz

     High Input Protection Level : +30dBm,±25VDC

     Reference Level Range : -30dBm~ +20dBm

     Two Markers for Absolute and Relative Measurement

     Support standard RS-232C Interface to connect with PC

     Options: Tracking Generator, Power Meter, Remote Control Software

Specification:

FREQUENCY
Frequency Range 150kHz~1GHz
Aging Rate ± 10ppm, 0~50°C, 2ppm/yr
Span Range 
 
Zero, 2kHz~100MHz/div in 1-2-5 sequence
Phase Noise -77dBc/Hz @ 1GHz 30kHz offset
Frequency Resolution 1kHz C.F. entry, 40Hz sweep resolution at 2kHz/div
Frequency Display 6 1/2 digit setting
Frequency Control
 
Digital phase locked
RESOLUTION BANDWIDTH
RBW Range 
 
3kHz, 30kHz, 220kHz, 4MHz
RBW Accuracy 
 
15%
Video Bandwidth Range 
 
1.6kHz/90kHz couple with RBW
AMPLITUDE
Measurement Range -100dBm~+20dBm
Overload Protection +30dBm continuous, ± 25VDC
Reference Level Range -30dBm~+20dBm
Amplitude Display Range 75dB
Amplitude Accuracy ±1.5dB typical @ 0dBm, 80MHz
Frequency Flatness ±1.5dB over 100MHz,±2.5dB typical over entire band/±3dB:150kHz~10MHz
Amplitude Level Linearity
 
± 1.5dB over 70dB
DYNAMIC RANGE
Average Noise Floor -95dBm @30kHz RBW, -100dBm typical /
-75dBm: 150kHz~10MHz
Third Inter-Modulation <-70dBc, @-40dBm input, 2tones, 2MHz apart/ 
<-45dBc:150kHz~10MHz
Harmonic Distortion <-40dBc, RF input < selected reference
Non-Harmonic Spurious  
DISPLAY SYSTEM
Display Device CRT Display, 8 x 10 graticule, 6-inch waveform screen 
LCD Display, 4 line x 20 character data screen
Display Function 
 
Center Frequency Control, Bandwidth, 
Reference Level, Span Range, Amplitude
FUNCTIONS
Marker Mode 
 
Absolute, relative, PK->marker, marker->center
Number of Markers
 
2
Marker Resolution 0.1dB, 1kHz
Marker Accuracy 0.1dB±amplitude accuracy
Memory 10 save/recall memory
Trace Max. hold, average(2~32 traces), freeze(Hold)
Setup
 
Access parameters
Demodulator
 
WB FM, 120kHz deviation 
MB FM, 75kHz deviation 
NB FM, 30kHz deviation 
AM 
Outputs : Internal speaker, 3.5mm stereo jack, 
wired for mono operation
Calibrate Signal 80MHz, -30dBm
Interface 
 
RS-232C standard & remote display software 
(The software will be downloaded from GW Web-Site.)
POWER SOURCE AC  
  100V/120V/220V/230V ±10%, 50/60Hz
ACCESSORIES
  User manual x 1, Power cord x 1
DIMENSIONS & WEIGHT  
  310(W) x 150(H) x 455(D) mm
Approx. 8.5kg