Manufacturer by Type

Products by Category



Gwinstek LCR-8000G Series LCR Meters

PDFPrintEmail
The LCR-8000G Series LCR meter, with test frequency up to 10MHz, provides accuracy, versatility and high resolution for a wide range of component measurements, even including DC resistance measurement and Voltage/Current monitoring.
Price:
Manufacturer: GWInstek
Description

The LCR-8000G Series LCR meter, with test frequency up to 10MHz, provides accuracy, versatility and high resolution for a wide range of component measurements, even including DC resistance measurement and Voltage/Current monitoring. The Multi-Step function allows on-screen programming of customized measurement sequence with Pass/Fail indication. Each program includes 30 test steps and each test step can be set with selected parameters and test limits. Under Multi-Step operation, a tedious work routine can be done step by step automatically just at a press of a button. With Graph Mode, LCR-8110G, LCR-8105G and LCR-8101G display the component impedance response either over a wide range of test frequency sweep or over a wide range of test voltage sweep in a graph chart. This gives an analysis result of either impedance vs. frequency or impedance vs. applied voltage all at a glance. GPIB and RS-232C interfaces are available as standard for instrument control and test result display on the PC. The rich features of LCR-8000G Series easily make your measurement tasks done at a very competitive price.

Features:

     Wide Test Frequency 20Hz ~ 10/5/1MHz

     0.1% Basic Accuracy & 6 Digits Measurement Resolution

     Large LCD Display with Intuitive Interface

     Full Measuring Functions with DUT V/I Monitor

     PASS/FAIL Function ( abs, % or delta) with Judgment Alarm

     DC Resistance Measurement

     Multiple Step Mode

     Standard RS-232C/GPIB Interface

     Optional DC Bias box

Specification:

TEST FREQUENCY
20Hz ~ 10 / 5 / 1 MHz, 5 Digits, ±0.005%
INPUT IMPEDANCE
100Ω
BASIC ACCURACY (*)
±0.1% (R, Z, X, G, Y, B, L, C)
TEST SPEED
AC (> 2kHz)
MAX: 75mS
FAST: 150mS
MEDIUM: 450mS
SLOW: 600mS
DC
MAX: 30mS
FAST: 60mS
MEDIUM: 120mS
SLOW: 900mS
TEST SIGNAL LEVELS
≦3MHz:10mV~2Vrms, 1mV/Step or 10mV/Step, 2%±5mV
>3MHz:10mV~1Vrms, 1mV/Step or 10mV/Step, 2%±5mV
SHORT CIRCUIT CURRENT
Max. 20mA
MEASUREMENT RANGES
R, Z, X 0.1mΩ ~ 100MΩ
G, Y, B 10nS ~ 1000S
L 0.1nH ~ 100kH
C 0.01pF ~ 1F
D 0.00001 ~ 9.9999
Q 0.1 ~ 9999.9
θ -180° ~ +180°
Rdc 0.1mΩ ~ 100MΩ
MEASUREMENT PARAMETERS
Impedance (Z), Phase Angle (θ), Inductance (L), Capacitance (C), AC Resistance (Rac), Quality Factor (Q), Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Susceptance (B), DC Resistance (Rdc)
SERIES OR PARALLEL EQUIVALENT CIRCUIT
C + R, C + D, C + Q, L + R, L + Q, L + D
SERIES EQUIVALENT CIRCUIT ONLY
X + R, X + D, X + Q
PARALLEL EQUIVALENT CIRCUIT ONLY
C + G, B + G, B + D, B + Q, B + R, L + G
POLAR FORM
Z + Phase Angle, Y + Phase Angle
AVERAGE
1 ~ 256 TIMES
LCD DISPLAY
320 x 240 DOT-MATRIX
INTERFACE
RS-232, GPIB
POWER SOURCE
AC 115V(+10% / -25%), 230V(+15% / -14%) (Selectable), 50/60Hz
DIMENSIONS & WEIGHT
330(W) x 170(H) x 340(D)mm, Approx. 5kg

(*):Basic accuracy varies with the speed, frequency, AC signal level and impedance of the device under test.